Digital Monitoring XR6 Manual de Instalação descarregar pdf (Página 31)

XR6/XR3 Installation Manual Connecting ac power

Issue 3.0 2009-07-15 Page 5-1

Section 5: Connecting ac power

To connect ac power to the transmitter, perform the following steps:

1. Run the ac power cable from the ac disconnect switch to the transmitter, passing all the

conductors, as a group, through a ferrite toroid (provided in the ancillary kit). The preferred

entry point is the top of the transmitter. Internal conduit is provided to guide the cable to the

power supply space at the bottom of the transmitter (see Figure 5.1).

Figure 5.1: Location of the ac power cable entry (top view of XR6/XR3 transmitter)

WARNING: Ensure that wiring sizes are appropriate. ac wiring must be

installed by a qualified, locally-certified electrician.

Front

Rear

AUDIO

CABLE

ENTRY

AC IN

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 97 98

Sem comentários

Digital Monitoring XR6 Manual de Instalação Página 31